Точка доступа Aruba (HPE) JW247A

SKU
JW247A
47 229,05 грн
EAN: 21890
Состояние: Новый
Статус: Доступен под заказ
Lead time: 25-35 дней
GPL price:

1997 $

HPE Aruba Instant IAP-228 (RW) FIPS/TAA - Radio access point

Прочные 228 беспроводных точек доступа в помещении обеспечивают гигабитную производительность Wi-Fi для мобильных устройств 802.11ac в суровых условиях внутри помещений, таких как склады и стадионы.

Его уникальный промышленный дизайн поддерживает более широкий диапазон температур для сред, в которых отсутствует нагрев и охлаждение. 228 также имеет шесть разъемов RP-SMA для внешних антенн с высоким коэффициентом усиления в больших общественных местах.

С максимальной скоростью передачи данных 1,3 Гбит / с в диапазоне 5 ГГц и 600 Мбит / с в диапазоне 2,4 ГГц 228 работает в три раза быстрее точек доступа 802.11n и обеспечивает производительность, аналогичную проводному соединению. Кроме того, для повышения простоты и безопасности сети динамическая сегментация автоматически применяет политики доступа на уровне устройств в реальном времени в проводных и беспроводных сетях Арубы.

Технические характеристики точки доступа Aruba (HPE) JW247A:

AP-228 SPECIFICATIONS

· 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors.

WIRELESS RADIO SPECIFICATIONS

· AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n

· In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.

· Software-configurable dual radio supports 5 GHz and 2.4 GHz

· 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate

· Supported frequency bands (country-specific restrictions apply):

· 2.4000 GHz to 2.4835 GHz

· 5.150 to 5.250 GHz

· 5.250 to 5.350 GHz

· 5.470 to 5.725 GHz

· 5.725 to 5.850 GHz

· Available channels: Dependent on configured regulatory domain

· Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

· Supported radio technologies:

· 802.11b: Direct-sequence spread-spectrum (DSSS)

· 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

· 802.11n/ac: 3x3 MIMO with up to three spatial streams

· Supported modulation types:

· 802.11b: BPSK, QPSK, CCK

· 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

· 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

· Transmit power: Configurable in increments of 0.5 dBm

· Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

· 2.4-GHz band: +28 dBm (23 dBm per chain)

· 5-GHz band: +28 dBm (23 dBm per chain)

· Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems

· Maximum ratio combining (MRC) for improved receiver performance

· Cyclic delay diversity (CDD) for improved downlink RF performance

· Short guard interval for 20-MHz, 40-MHz and 80-MHz channels

· Space-time block coding (STBC) for increased range and improved reception

· Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

· Transmit beam-forming (TxBF) for increased reliability in signal delivery

· Supported data rates (Mbps):

· 802.11b: 1, 2, 5.5, 11

· 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

· 802.11n: 6.5 to 450 (MCS0 to MCS23)

· 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)

· 802.11n high-throughput (HT) support: HT 20/40

· 802.11ac very high throughput (VHT) support: VHT 20/40/80

· 802.11n/ac packet aggregation: A-MPDU, A-MSDU

POWER

· Worst-case power consumption from the AP: 23W

· Power sources sold separately

· Power over Ethernet (PoE+): 802.3at-compliant

OTHER INTERFACES

· Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

· Auto-sensing link speed and MDI/MDX

· Load balancing support to achieve platform throughput greater than 1 Gbps

· PoE-PD: 802.3at PoE+

· Serial console interface (Micro USB)

MOUNTING

· Optional mounting kits

· AP-220-MNT-W1 is directly compatible

· 270 Series outdoor AP mounts (AP-270-MNT-V1, AP-270-MNT-V2, AP-270-MNT-H1, AP-270-MNT-H2) are compatible when the AP-270-MNT-ADP adapter is utilized

MECHANICAL

· Dimensions/weight (unit, excluding mount accessories):

· 222 mm (L) x 150 mm (W) x 75 mm (H), 8.5” (L) x 6” (W) x 2.5” (H)

· 1.225 kg/2.700 lbs

ENVIRONMENTAL

· Operating:

· Temperature: -40° C to +60° C (-40° F to +140° F)

· Humidity: 5% to 95% non-condensing

· Storage and transportation:

· Temperature: -40° C to +70° C (-40° F to +158° F)

· Operating Altitude: 3,000 m

ANTENNAS

· Six RP-SMA connectors for external antennas

REGULATORY

· FCC/Industry of Canada

· CE Marked

· R&TTE Directive 1995/5/EC

· Low Voltage Directive 72/23/EEC

· EN 300 328

· EN 301 489

· EN 301 893

· UL/IEC/EN 60950

· EN 60601-1-1 and EN 60601-1-2

· For more country-specific regulatory information and approvals, please see your Aruba representative.

REGULATORY MODEL NUMBERS

· AP-228 and IAP-228: APIN0228

CERTIFICATIONS

· CB Scheme Safety, cTUVus

· UL2043 plenum rating

· Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

WARRANTY

· Aruba limited lifetime warranty

MINIMUM SOFTWARE VERSION

· ArubaOS 6.4.3.0

· Aruba Instant 4.2.0

Код товара21890
ManufacturerAruba
Ваша оценка