|
C9117AXI-E Specification
|
|
Description
|
Cisco Catalyst 9117AX Access Point, Internal antenna; Wi-Fi 6; 8x8:8 MIMO, E Domain
|
|
Software
|
● Cisco Unified Wireless Network Software Release 8.9 or later
● Cisco IOS ® XE Software Release 16.11 or later
|
|
Supported wireless LAN controllers
|
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller
|
|
802.11n version 2.0 (and related) capabilities
|
● 8x8 MIMO with four spatial streams for 5-GHz band
● 4x4 MIMO with four spatial streams for 2.4-GHz band
● Maximal Ratio Combining (MRC)
● 20- and 40-MHz channels
● PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● Cyclic Shift Diversity (CSD) support
|
|
802.11ac
|
● 8x8 downlink MU-MIMO with eight spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80, and 160-MHz channels
● PHY data rates up to 3.5 Gbps at 5 GHz
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● CSD support
|
|
802.11ax
|
● 8x8 MIMO with eight spatial streams for 5-GHz band
● 4x4 MIMO with four spatial streams for 2.4-GHz band
● Downlink OFDMA
● TWT
● MRC
● 802.11ax beamforming
● 20-, 40-, 80, and 160-MHz channels
● PHY data rates up to 5 Gbps at 5 GHz
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● CSD support
|
|
Integrated antenna
|
● 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
|
|
Interfaces
|
● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
● Management console port (RJ-45)
● USB 2.0 with up to 3.75W (enabled via future software)
|
|
Indicators
|
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
|
Dimensions (W x L x H)
|
● Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
● Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
|
|
Weight
|
● 3.02 lb (1.4 kg)
|
|
Input power requirements
|
● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.
|
|
Environmental
|
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 122°F (0° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
|
|
System memory
|
● 2048 MB DRAM
● 1024 MB flash
|
|
DFS
|
● 802.11 dynamic frequency selection (DFS)
|
|
Warranty
|
Limited lifetime hardware warranty
|
|
Available transmit power settings
|
2.4 GHz
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
● -1 dBm (0.78 mW)
● -4 dBm (0.4 mW)
● -6 dBm (0.25 mW)
5 GHz
● 26 dBm (400 mW)
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
● -1 dBm (0.78 mW)
● -4 dBm (0.4 mW)
|
|
Frequency band and 20-MHz operating channels
|
E (E regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
|
