|
Standards
|
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
|
|
Ports
|
Ethernet, Power
|
|
Switch
|
Power button (on/off)
|
|
Buttons
|
Reset
|
|
Cabling type
|
Category 5e or better
|
|
LEDs
|
Power, Wireless, LAN
|
|
Operating system
|
Linux
|
|
Physical Interfaces
|
|
Ports
|
Gigabit Ethernet, 12V DC power with support for 802.3af PoE
|
|
Power supply
|
Not included with access point, but supports external power 12V DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
|
|
Buttons
|
Power (on/off) push button; Reset button
|
|
Lock slot
|
Slot for Kensington lock
|
|
LED
|
Power, Wireless, Ethernet
|
|
Physical Specifications
|
|
Physical dimensions (W x D x H)
|
6.66 x 6.67 x 1.38 in. (169.08 x 169.42 x 35 mm)
|
|
Weight
|
0.606 lb or 275g
|
|
PoE
|
|
PoE
|
802.3af
|
|
Peak PoE power
|
10.6W
|
|
Network Capabilities
|
|
Network protocols
|
IEEE 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460), RADIUS, syslog, HTTP/HTTPS, Simple Network Management Protocol (SNMP)
|
|
VLAN support
|
Yes
|
|
Number of VLANs
|
1 management VLAN plus 8 VLANs for SSID
|
|
Multiple SSIDs
|
8
|
|
802.1X supplicant
|
Yes
|
|
802.11d
|
No
|
|
SSID to VLAN mapping
|
Yes
|
|
Auto channel selection
|
Yes
|
|
Spanning tree
|
Yes
|
|
Load balancing
|
Yes
|
|
IPv6
|
Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
|
|
Layer 2
|
802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
|
|
Security
|
|
WEP/WPA/WPA2
|
Yes, including Enterprise authentication
|
|
Access control
|
Yes, management access control list (ACL) plus MAC ACL
|
|
Secure management
|
HTTPS
|
|
Wi-Fi Protected Setup (WPS)
|
Yes (soft WPS, no hardware push button)
|
|
SSID broadcast
|
Yes
|
|
Rogue access point detection
|
Yes
|
|
Mounting and Physical Security
|
|
Multiple mounting options
|
Desktop installation; mounting bracket included for easy ceiling or wall mounting
|
|
Physical security lock
|
Kensington lock slot
|
|
Quality of Service
|
|
Quality of service (QoS)
|
Wi-Fi Multimedia Traffic Specification (WMM TSPEC)
|
|
Performance
|
|
Wireless throughput
|
Data rate =300 Mbps; actual client throughput will vary.
|
|
Recommended user support
|
Up to 32 connective users, 20 active users
|
|
Configuration
|
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
|
Single Point Setup
|
Yes
|
|
Maximum access points per cluster
|
8
|
|
Active clients per cluster
|
80
|
|
Management
|
|
Management protocols
|
Web browser, SNMP v3, Bonjour
|
|
Remote management
|
Yes
|
|
Event logging
|
Local, remote syslog, email alerts
|
|
Network diagnostics
|
Logging and packet capture
|
|
Web firmware upgrade
|
Firmware upgradable through web browser, imported/exported configuration file
|
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
|
IPv6 host
|
Yes
|
|
HTTP redirect
|
Yes, and captive portal
|
|
Wireless
|
|
Frequency
|
Selectable-band 2.4 GHz or 5 GHz (not concurrent)
|
|
Radio and modulation type
|
Single radio, orthogonal frequency division multiplexing (OFDM)
|
|
WLAN
|
802.11n
|
|
Operating channels
|
1 to 13 (depending on country)
|
|
Wireless isolation
|
Wireless isolation between clients
|
|
External antennas
|
None
|
|
Internal antennas
|
Internal fixed PIFA antenna
|
|
Antenna gain in dBi
|
2 dBi each antenna
|
|
Transmitted output power
|
● 802.11b @ 11 Mbps: 17 dBm
● 802.11g @ 54 Mbps: 13 dBm
● 802.11n @ HT20HT40, MCS15: 13 dBm
|
|
Receiver sensitivity
|
● 802.11b: 11 Mbps @ –86 dBm
● 802.11g: 54 Mbps @ –71 dBm
● 802.11n: 300 Mbps @ –64 dBm
|
|
Wireless Distribution System (WDS)
|
Yes
|
|
Roaming
|
Yes
|
|
Fast roaming
|
802.11i preauthentication
|
|
Active WLAN clients
|
Same as number of users: 32 max connected users, 20 active users recommended
|
|
Multiple SSIDs
|
8
|
|
Wireless VLAN map
|
Yes
|
|
WLAN security
|
Yes
|
|
Wi-Fi Multimedia (WMM)
|
Yes, with automatic power save, and Voice profile
|
|
Operating Modes
|
|
Access point
|
Access Point mode, WDS bridging, Workgroup Bridge mode
|
|
Environmental
|
|
Power
|
12V 1A DC input, and IEEE 802.3af compliant PoE
|
|
Certifications
|
FCC class B, CE, IC, Wi-Fi
|
|
Operating temperature
|
0° to 40°C (32° to 104°F)
|
|
Storage temperature
|
–20° to 70°C (–4° to 158°F)
|
|
Operating humidity
|
10% to 85% noncondensing
|
|
Storage humidity
|
5% to 90% noncondensing
|
|
Mean time between failures (MTBF)
|
492281 hours
|
|
Package Contents
|
|
● Cisco WAP321 Wireless-N Selectable-Band Access Point withSingle Point Setup
● Ceiling/wall mounting kit
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
|
|
Minimum Requirements
|
|
● 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
● Switch/router with PoE support or PoE injector when used with PoE
● Web-based configuration: Java-enabled web browser
|
