|
Standards
|
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
|
|
Cabling type
|
Category 5e or better
|
|
Antennas
|
Internal antennas optimized for installation on a wall or ceiling
|
|
LED indicators
|
Power, WLAN, LAN
|
|
Operating system
|
Linux
|
|
Physical Interfaces
|
|
Ports
|
5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included)
|
|
Power Supply
|
802.3af/at PoE and External 48V/1.25A DC power adapter (not included)
|
|
Buttons
|
Reset button, Power On/Off
|
|
Lock slot
|
Slot for Kensington lock
|
|
Physical Specifications
|
|
Physical dimensions (W x D x H)
|
9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm)
|
|
Weight
|
1.34 lb or 0.607 kg
|
|
Network Capabilities
|
|
VLAN support
|
Yes
|
|
Number of VLANs
|
1 management VLAN plus 16 VLANs for SSIDs
|
|
802.1X supplicant
|
Yes
|
|
SSID-to-VLAN mapping
|
Yes
|
|
Auto channel selection
|
Yes
|
|
Spanning Tree
|
Yes
|
|
Load balancing
|
Yes
|
|
IPv6
|
Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
|
|
Layer 2
|
802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN
|
|
Security
|
|
WPA/WPA2
|
Yes, including Enterprise authentication
|
|
Access control
|
Yes, management access control list (ACL) plus MAC ACL
|
|
Secure management
|
HTTPS
|
|
SSID broadcast
|
Yes
|
|
Rogue-access-point detection
|
Yes
|
|
Mounting and Physical Security
|
|
Multiple mounting options
|
Mounting bracket included for easy ceiling or wall mounting
|
|
Physical security lock
|
Kensington lock slot
|
|
Quality of Service
|
|
Quality of service (QoS)
|
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
|
|
Performance
|
|
Wireless throughput
|
Up to 300-Mbps data rate (real-world throughput will vary)
|
|
Recommended user support
|
32 active clients/users per radio
|
|
Multiple-Access Point Management
|
|
Single Point Setup
|
Yes
|
|
Number of access points per cluster
|
8
|
|
Active clients per cluster
|
240
|
|
Configuration
|
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
|
Management
|
|
Management protocols
|
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
|
|
Remote management
|
Yes
|
|
Event logging
|
Local, remote syslog, email alerts
|
|
Network diagnostics
|
Logging and packet capture
|
|
Web firmware upgrade
|
Firmware upgradable through web browser, imported/exported configuration file
|
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
|
IPv6 host
|
Yes
|
|
HTTP redirect
|
Yes
|
|
Wireless
|
|
Frequency
|
Dual concurrent radios (2.4 and 5 GHz)
|
|
Radio and modulation type
|
Dual radio, orthogonal frequency division multiplexing (OFDM)
|
|
WLAN
|
802.11n
2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz
2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz
20, and 40 MHz for 802.11n
PHY data rate up to 600 Mbps
|
|
Data rates supported
|
802.11a/b/g:
● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 300 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates
|
|
Frequency band and 20-MHz operating channels
|
A Regulatory Domain:
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.240 GHz; 4 channels
● 5.745 to 5.825 GHz; 5 channels
|
E Regulatory Domain:
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.240 GHz; 4 channels
C Regulatory Domain:
● 2.412 to 2.462 GHz; 11 channels
● 5.745 to 5.805 GHz; 4 channels
|
|
Nonoverlapping channels
|
2.4 GHz
● 802.11b/g
◦ 20 MHz: 3
● 802.11n
◦ 20 MHz: 3
5 GHz
● 802.11a
◦ 20 MHz: 9
● 802.11n
◦ 20 MHz: 9
◦ 40 MHz: 4
|
|
Wireless isolation
|
Wireless isolation between clients
|
|
External antennas
|
None
|
|
Internal antennas
|
Internal Fixed PiFA Antenna
|
|
Antenna gain in dBi
|
Maximum antenna gain of 5.3 dBi on 2.4 GHz
Maximum antenna gain of 5.1 dBi on 5 GHz
|
|
Wireless distribution system (WDS)
|
Yes
|
|
Roaming
|
802.11i only
|
|
Multiple SSIDs
|
16
|
|
Wireless VLAN map
|
Yes
|
|
WLAN security
|
Yes
|
|
Wi-Fi Multimedia (WMM)
|
Yes, with unscheduled automatic power save
|
|
Operating Modes
|
|
Access point
|
Access Point mode, WDS Bridging, Workgroup Bridge mode
|
|
Environmental
|
|
Power options
|
IEEE 802.3af/af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - SB-PWR-48V-xx (not included)
PoE power:
Peak PoE power: 18W
|
|
Compliance
|
Safety:
● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● IEC 60950-1
● EN 60950-1
Radio approvals:
● FCC Part 15.247, 15.407
● RSS-210 (Canada)
● EN 300.328, EN 301.893 (Europe)
● AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
● FCC Part 15.107 and 15.109
● ICES-003 (Canada)
● EN 301.489-1 and -17 (Europe)
|
|
Operating temperature
|
0° to 40°C (32° to 104°F)
|
|
Storage temperature
|
-20° to 70°C (-4° to 158°F)
|
|
Operating humidity
|
10% to 85% noncondensing
|
|
Storage humidity
|
5% to 90% noncondensing
|
|
System memory
|
128-MB RAM
128-MB Flash
|
|
Package Contents
|
|
● CiscoWAP351 Wireless-N Dual Radio Access Point
● Ceiling-/wall-mounting kit
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
|
|
Minimum Requirements
|
|
● Switch or router with PoE support, PoE injector, or AC Power Adapter
● Web-based configuration: Java-enabled web browser
|
