Standards
|
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
|
Ports
|
LAN Gigabit Ethernet auto sensing
|
Cabling type
|
Category 5e or better
|
Antennas
|
Internal antennas optimized for installation on a wall or ceiling
|
LED indicators
|
Power, WLAN, LAN
|
Operating system
|
Linux
|
Physical Interfaces
|
Ports
|
10/100/1000 Ethernet, with support for 802.3af PoE
|
Buttons
|
Reset button
|
Lock slot
|
Slot for Kensington lock
|
LEDs
|
Power, Wireless, Ethernet
|
Physical Specifications
|
Physical dimensions (W x D x H)
|
9.05 x 9.05 x .98 in. (230 x 230 x 25 mm)
|
Weight
|
WAP561: 1.51 lb or 685 g; WAP551: 1.41 lb or 640g
|
Network Capabilities
|
VLAN support
|
Yes
|
Number of VLANs
|
1 management VLAN plus 16 VLANs for SSIDs
|
802.1X supplicant
|
Yes
|
SSID-to-VLAN mapping
|
Yes
|
Auto channel selection
|
Yes
|
Spanning tree
|
Yes
|
Load balancing
|
Yes
|
IPv6
|
Yes
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
|
Layer 2
|
802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN
|
Security
|
WPA/WPA2
|
Yes, including Enterprise authentication
|
Access control
|
Yes, management access control list (ACL) plus MAC ACL
|
Secure management
|
HTTPS
|
Wi-Fi Protected Setup (WPS)
|
Yes (soft WPS, no hardware push button)
|
SSID broadcast
|
Yes
|
Rogue access point detection
|
Yes
|
Mounting and Physical Security
|
Multiple mounting options
|
Mounting bracket included for easy ceiling or wall mounting
|
Physical security lock
|
Kensington lock slot
|
Quality of Service
|
Quality of service (QoS)
|
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC)
|
Performance
|
Wireless throughput
|
Up to 450 Mbps data rate (real-world throughput will vary)
|
Recommended user support
|
Up to 64 connective users, 30 active users per radio
|
Multiple-Access Point Management
|
Single Point Setup
|
Yes
|
Number of access points per cluster
|
16
|
Active clients per cluster
|
480
|
Configuration
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
Management
|
Management protocols
|
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
|
Remote management
|
Yes
|
Event logging
|
Local, remote syslog, email alerts
|
Network diagnostics
|
Logging and packet capture
|
Web firmware upgrade
|
Firmware upgradable through web browser, imported/exported configuration file
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
IPv6 host
|
Yes
|
HTTP redirect
|
Yes
|
Wireless
|
Frequency
|
WAP551: Selectable radio band (2.4 or 5 GHz) WAP561: Dual concurrent radios (2.4 and 5 GHz)
|
Radio and modulation type
|
Single radio (WAP551) or dual radio (WAP561), orthogonal frequency division multiplexing (OFDM)
|
WLAN
|
802.11b/g/n
3x3 multiple-input multiple-output (MIMO) with 3 spatial streams
20 and 40 MHz channels
PHY data rate up to 450 Mbps
802.11 dynamic frequency selection (DSF), EU version only
|
Data rates supported
|
802.11a/b/g:
● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n:
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates
|
Frequency band and operating channels
|
802.11b
2412
2437
2462
802.11g
2412
2437
2462
802.11n 20 MHz (2.4 GHz band)
2412
2437
2462
802.11n 40 MHz (2.4 GHz band)
2422
2437
2452
|
802.11a
5180
5320
5500
5700
802.11n 20 MHz (5 GHz band)
5180
5320
5500
5700
5825
802.11n 40 MHz (5 GHz band)
5190
5510
5795
|
Nonoverlapping channels
|
2.4 GHz
● 802.11b/g
◦ 20 MHz: 3
● 802.11n
◦ 20 MHz: 3
5 GHz
● 802.11a
◦ 20 MHz: 24
● 802.11n
◦ 20 MHz: 24
◦ 40 MHz: 11
|
Transmitted output power
|
● WAP551:
◦ 802.11a@54Mbps: 13dBm
◦ 802.11b@11Mbps: 19dBm
◦ 802.11g@54Mbps: 16dBm
◦ 802.11n@HT20, HT40, MCS15: 14dBm
● WAP561:
◦ 802.11a@54Mbps: 13dBm
◦ 802.11b@11Mbps: 19dBm
◦ 802.11g@54Mbps: 16dBm
◦ 802.11n@HT20, HT40, MCS15: 14dBm
|
Wireless isolation
|
Wireless isolation between clients
|
External antennas
|
None
|
Internal antennas
|
5 internal dipole antennas for the WAP551 and 10 antennas for the WAP561
|
Antenna gain in dBi
|
5 dBi each antenna
|
Receiver sensitivity
|
2.4 GHz
● 802.11b/g
◦ 1 Mbps: –91 dBm
◦ 11 Mbps: –85 dBm
◦ 6 Mbps: –86 dBm
◦ 54 Mbps: –69 dBm
● 802.11n/20 MHz
◦ MCS0: –86 dBm
◦ MCS7: –70 dBm
◦ MCS8: –85 dBm
◦ MCS15: –68 dBm
● 802.11n/40 MHz
◦ MCS0: –84 dBm
◦ MCS7: –66 dBm
◦ MCS8: –83 dBm
◦ MCS15: –65 dB
5 GHz
● 802.11a
◦ 6 Mbps: –82 dBm
◦ 54 Mbps: –67 dBm
● 802.11n/20 MHz
◦ MCS0: –83 dBm
◦ MCS7: –68 dBm
◦ MCS8: –82 dBm
◦ MCS15: –66 dBm
● 802.11n/40 MHz
◦ MCS0: –82 dBm
◦ MCS7: –64 dBm
◦ MCS8: –81 dBm
◦ MCS15: –62 dBm
|
Wireless distribution system (WDS)
|
Yes
|
Fast roaming
|
Yes
|
Multiple SSIDs
|
WAP551: 16
WAP561: 16 x 2
|
Wireless VLAN map
|
Yes
|
WLAN security
|
Yes
|
Wi-Fi Multimedia (WMM)
|
Yes, with unscheduled automatic power save
|
Operating Modes
|
Access point
|
Access Point mode, WDS Bridging, Workgroup Bridge mode
|
Environmental
|
Power options
|
IEEE 802.3af Ethernet switch
Cisco SB-PWR-INJ2-xx
POE power:
Peak power:
● WAP551: 7.872W
● WAP561: 11.1W
|
Compliance
|
Safety:
● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● IEC 60950-1
● EN 60950-1
Radio approvals:
● FCC Part 15.247, 15.407
● RSS-210 (Canada)
● EN 300.328, EN 301.893 (Europe)
● AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
● FCC Part 15.107 and 15.109
● ICES-003 (Canada)
● EN 301.489-1 and -17 (Europe)
|
Operating temperature
|
0° to 40°C (32° to 104°F)
|
Storage temperature
|
–20° to 70°C (–4° to 158°F)
|
Operating humidity
|
10% to 85% noncondensing
|
Storage humidity
|
5% to 90% noncondensing
|
System memory
|
64 MB RAM
32 MB flash
|
Package Contents
|
● Cisco WAP551 or WAP561 Wireless-N access point
● Ceiling/wall mounting kit
● User guide on CD-ROM
● Quick-start guide
● Ethernet network cable
|
Minimum Requirements
|
● 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
● Switch/router with PoE support or PoE injector
● Web-based configuration: Java-enabled web browser
|