Точка доступа Fortinet FAP-222E

FORTIAP 222E

Hardware Type

Outdoor AP

Number of Radios

2 + 1 BT/BLE

Number of Antennas

4 External + 1 BT/BLE External

Antenna Type and Peak Gain

Dipole: 5 dBi for 2.4 GHz, 7 dBi for 5 GHz

Frequency Bands (GHz)*

2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850

Radio 1 Capabilities

2.4 GHz b/g/n (2x2:2 stream) 20/40 MHz (256 QAM)

Radio 2 Capabilities

5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz (256 QAM)

Maximum Data Rate

Radio 1: up to 400 Mbps, Radio 2: up to 867 Mbps

Bluetooth Low Energy (BT/BLE) Radio

Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power

Interfaces

1x 10/100/1000 Base-T RJ45

Power over Ethernet (PoE)

IEEE 802.3af/at

Simultaneous SSIDs

Up to 16 (14 if background scanning enabled)

EAP Type(s)

EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

User/Device Authentication

WPA™ and WPA2™ with 802.1x or Preshared key, WEP,
Web Captive Portal, MAC blacklist & whitelist

Maximum Tx Power

2.4 GHz: 27.2 dBm / 525 mW (2 chains combined), 5 GHz: 29.5 dBm / 891 mW (2 chains combined)

Kensington Lock

No

IEEE Standards

802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v,
802.11ac, 802.1X, 802.3af, 802.3at, 802.3az

SSID Types Supported

Local-Bridge, Tunnel & Mesh (when managed by controller)

Per Radio Client Capacity

Up to 512

Cellular Co-existence

Yes

LED Off Mode

Yes

802.11ac Wave2 MU-MIMO

Yes

Transmit Beam Forming (TxBF)

Yes

Low-Density Parity Check (LDPC) Encoding

Yes

Maximum Likelihood Demodulation (MLD)

Yes

Maximum Ratio Combining (MRC)

Yes

A-MPDU and A-MSDU Packet Aggregation

Yes

MIMO Power Save

Yes

Short Guard Interval

Yes

Rogue Scan Radio Modes

Background, Full-time

WIPS / WIDS Radio Modes

Background, Full-time

Packet Sniffer Mode

Yes

Spectrum Analyzer

Yes

Length x Width x Height

9.8 x 8.66 x 2 inches (249 x 220 x 53 mm)

Weight

3.40 lbs (1.54 kg)

Package (shipping) Weight

8.40 lbs (3.81 kg)

Mounting Options

Wall Mount or Pole Mount

Power Supply

GPI-115, or GPI-130

Power Consumption (Maximum)

12.95 W

Humidity

5–90% non-condensing

Operating / Storage Temperature

-40–140°F (-40–60°C) / -40–158°F (-40–70°C)

Directives

Low Voltage Directive • RoHS

UL2043 Plenum Material

No

Mean Time Between Failures

>10 Years

IP Rating

IP67

Surge Protection Built In

Yes

Hit-less PoE Failover

No