Інтерфейсний модуль Cisco C6800-32P10G-XL

Product Code

C6800-32P10G-XL=

Ports per module

·32 ports—Thirty-two 1G ports, or thirty-two 10G ports, or eight 40G ports
·Ports are numbered left to right.
·The top row has odd numbered ports 1 to 31.
·The bottom row has even numbered ports 2 to 32.
·4 port groups. Port ranges per port group:
·1, 3, 5, 7, 9,11, 13, 15
·2, 4, 6, 8, 10, 12, 14, 16
·17, 19, 21, 23, 25, 27, 29, 31
18, 20, 22, 24, 26, 28, 30, 32

Backplane connection

160-Gbps backplane bandwidth in 6807XL; 80 Gbps backplane bandwidth in 6500-E chassis

Chassis/slot support

Can occupy slots 1-2 and 5-7 in a Cisco Catalyst 6807-XL. Can occupy any slot in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E

Distributed forwarding and performance

Comes equipped with factory-installed dual (2) DFC4-E or DFC4-EXL daughter cards

Maximum frame size

Up to 9216 bytes per frame

Module oversubscription rate

·2:1 oversubscription in a Cisco Catalyst 6807-XL chassis. (When all thirty-two 10G ports are used.)
·4:1 oversubscription in a Cisco Catalyst 6500 E-series chassis.(When all thirty-two 10G ports are used.)

Supervisor engine support

Supervisor Engine 2T-10GE

Supervisor Engine 6T

Software support

With Supervisor Engine 2T-10GE —Cisco IOS Release 15.2(1)SY or later

With Supervisor Engine 6T – Cisco IOS Release 15.3(1)SY or later

Fabric channel speed

In a Cisco Catalyst 6807-XL chassis—160 GB per second

In a Cisco Catalyst 6500-E series chassis—80 GB per second

TDR support

Supported with GLC-T (1G Copper SFP) transceivers

Digital Optical Monitoring (DOM) support

The DOM-supported 1G transceivers and 10G Fiber SFP/SFP+ transceivers

Port connector type

LC (optical) or RJ-45 (copper) depending on the SFP transceiver installed. Depending on the distance between the end ports, different QSFP+ transceivers can be used

Dimensions (H x W x D)

1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm)

Weight

14.33 lb (6.5 kg)