|
Item
|
S5700-28C-HI
|
S5700-28C-HI-24S
|
S5710-108C-PWR-HI
|
|
Fixed Ports
|
24 x 10/100/1,000 Base-T
|
24 x 100/1,000 Base-X
|
48 x 10/100/1,000 BASE-T, 8 x 10 GE SFP+
|
|
Extended Slots
|
1 extended slot: Optional subcard
1: 2 x 10 GE SFP+ Optional subcard
2: 4 x 10 GE SFP+ Optional subcard
3: 4 x 1,000 BASE-X
|
3 front extended slots:
Optional subcard 1: 16 x 10/100/1,000 BASE-T
Optional subcard 2: 16 x 1,000 BASE-X 1 rear extended slot:
Optional subcard 1: 4 x 10 GE SFP+ (no GE auto adaption)
Optional subcard 2: 4 x 40 GE QSFP+
|
|
MAC Address Table
|
IEEE 802.1d compliance
32K MAC address entries
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
|
IEEE 802.1d compliance
456K MAC address entries
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
|
|
VLAN
|
4K VLANs
Guest VLAN and voice VLAN
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
|
|
Reliability
|
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
SEP
ERPS (G.8032)
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
BPDU protection, root protection, and loop protection
|
|
MPLS Features
|
MPLS L3VPN
MPLS L2VPN (VPWS/VPLS)
MPLS-TE
MPLS QoS
|
|
IP Routing
|
Static routing, RIPv1/v2, OSPF, IS-IS, BGP, and ECMP
|
|
IPv6 Features
|
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
IPv6 Static routing, RIPng, OSPFv3, IS-ISv6, BGP4+, and ECMP
|
|
Multicast
|
IGMP v1/v2/v3 snooping and IGMP fast leave MLD v1/v2 snooping
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
IGMPv1/v2/v3, MLDv1/v2, PIM-SM, PIM-DM, PIM-SSM, and MSDP
|
|
QoS/ACL
|
Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port WRR, DRR, PQ, WRR + PQ, and DRR + PQ queue scheduling algorithms
WRED
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
|
|
Security
|
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
|
|
OAM
|
Hardware OAM:
EFM OAM
CFM OAM
Y.1731 performance test (hardware-level delay and jitter detection)
|
Software OAM:
EFM OAM
CFM OAM
Y.1731 performance test
|
|
Management and Maintenance
|
iStack
MAC Forced Forwarding (MFF)
Virtual cable test
SNMP v1/v2c/v3
RMON
Web-based NMS
System logs and alarms of different levels
802.3az EEE
sFlow
NetStream
Dying gasp
|
|
Operating Environment
|
Operating temperature: 0°З to 50°З
Relative humidity: 5% to 95% (non-condensing)
|
|
Input Voltage
|
AC:
Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 50/60 Hz
DC:
Rated voltage range: –48V to –60V, DC Maximum voltage range: –36V to –72V, DC
|
|
Dimensions (W x D x H)
|
442 mm x 220 mm x 43.6 mm
|
442 mm x 470 mm x 87.2 mm
|
|
Power Consumption
|
< 76W
|
< 80W
|
< 1,680W
(Device: 240W, PoE: 1440W)
|
