|
Redundancy Design
|
Supervisors, power modules, CMUs, fans trays
|
|
Wireless Network Management
|
Native AC
|
|
AP access control, AP region management, and AP profile management
|
|
Radio profile management, uniform static configuration, and centralized dynamic management
|
|
Basic WLAN services, QoS, security, and user management
|
|
Deployment of ACs on different network layers
|
|
User Management
|
Unified user management
|
|
802.1x, MAC address, and Portal authentication
|
|
Traffic- and time-based accounting
|
|
User authorization based on user groups, domains, and time ranges
|
|
VLAN
|
4K VLANs
|
|
Access, trunk, and hybrid interface types, auto-negotiation of LNP links
|
|
Default VLAN
|
|
VLAN switching
|
|
QinQ and selective QinQ
|
|
MAC address-based VLAN assignment
|
|
VxLAN
|
VxLAN
|
|
Configured through NETCONF protocol
|
|
ARP
|
256K ARP entries
|
|
MAC Address
|
1M MAC address entries
|
|
MAC address learning and aging
|
|
Static, dynamic, and blackhole MAC address entries
|
|
Packet filtering based on source MAC addresses
|
|
Limit on the number of MAC addresses learned on ports and VLANs
|
|
Ring Protection
|
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
|
|
SEP
|
|
BPDU protection, root protection, and loop protection
|
|
BPDU tunnel
|
|
ERPS (G.8032)
|
|
IP Routing
|
1M IPv4 routing entries
|
|
IPv4 routing protocols, such as RIP v1/v2, OSPF, BGP, and IS-IS
|
|
IPv6 dynamic routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
|
|
Multicast
|
128,000 multicast routing entries
|
|
IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping
|
|
PIM-DM, PIM-SM, and PIM-SSM
|
|
MSDP and MBGP
|
|
Fast leave
|
|
Multicast traffic control
|
|
Multicast querier
|
|
Multicast packet suppression
|
|
Multicast CAC
|
|
Multicast ACL
|
|
MPLS
|
Basic MPLS functions
|
|
MPLS OAM
|
|
MPLS-TE
|
|
MPLS VPN/VLL/VPLS
|
|
CSS Switch Fabric Clustering
|
CSS Switch Fabric Clustering (S7706 and S7712)
|
|
Service Port Clustering
|
Service Port Clustering (S7706 and S7712)
|
|
Reliability
|
LACP and E-Trunk between devices
|
|
VRRP and BFD for VRRP
|
|
BFD for BGP/IS-IS/OSPF/static route
|
|
NSF and GR for BGP/IS-IS/OSPF/LDP
|
|
TE FRR and IP FRR
|
|
HSR
|
|
Ethernet OAM (IEEE 802.3ah and 802.1ag)
|
|
ITU-Y.1731
|
|
DLDP
|
|
QoS
|
256K ACLs
|
|
Traffic classification based on Layer 2 protocol packet header, Layer 3 protocol information, Layer 4 protocol information, and 802.1p priority
|
|
ACL, CAR, re-marking, and scheduling
|
|
Queue scheduling algorithms including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
|
|
Congestion avoidance mechanisms, such as WRED and tail drop
|
|
HQoS
|
|
Traffic shaping
|
|
Configuration and Maintenance
|
Zero-Touch Provisioning
|
|
Console and SSH terminals
|
|
Network management protocols, such as SNMP v1/v2c/v3
|
|
File uploading and downloading using FTP and TFTP
|
|
BootROM upgrade and remote upgrade
|
|
Hot patches
|
|
User operation logs
|
|
Security and Management
|
802.1x authentication and portal authentication
|
|
MACSec
|
|
NAC
|
|
RADIUS and HWTACACS authentication
|
|
Different user levels for commands, preventing unauthorized users from using certain commands
|
|
Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks
|
|
Ping and traceroute
|
|
RMON
|
|
Service Chain
|
|
Time synchronization
|
IEEE 1588v2
|
|
SyncE
|
|
Value-added Service*
|
Firewall
|
|
NAT
|
|
NetStream
|
|
IPSec
|
|
Load balancing
|
|
IPS
|
|
Interoperability
|
Supports VBST (compatible with PVST/PVST+/RPVST)
|
|
Supports LNP (similar to DTP)
|
|
Supports VCMP (similar to VTP)
|
|
Energy Conservation
|
IEEE 802.3az: Energy Efficient Ethernet (EEE)
|
|
Working Voltage
|
DC: –38.4V to –72V
AC: 90V to 290V
|
