|
AIR-AP4800-E-K9 Specification
|
|
Description
|
802.11ac W2 Analytics AP w/CA; 4x3:3; Location; mGig -E Domain
|
|
Software and supported wireless LAN controllers
|
- Cisco Unified Wireless Network Software Release 8.7 or later
- Cisco 3500 Series Wireless Controllers, 5520 Series Wireless Controllers, 8540 Series Wireless Controllers, and Virtual Wireless Controller, Cisco 9800 series Wireless Controllers
- Cisco IOS ® XE Software Release 16.9
- Cisco Catalyst ® 3850 Series and 3650 Series Switches
|
|
802.11n version 2.0 (and related) capabilities
|
- 4x4 MIMO with three spatial streams
- Maximal Ratio Combining (MRC)
- 802.11n and 802.11a/g beamforming
- 20- and 40-MHz channels
- PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 Dynamic Frequency Selection (DFS)
- Cyclic Shift Diversity (CSD) support
|
|
802.11ac Wave 1 capabilities
|
- 4x4 MIMO with three spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, and 80-MHz channels
- PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
|
|
802.11ac Wave 2 capabilities
|
- 4x4 MU-MIMO with three spatial streams
- MRC
- 802.11ac beamforming
- 20-, 40-, 80, 160-MHz channels
- PHY data rates up to 5.2 Gbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
|
|
Wi-Fi Alliance certifications
|
- Wi-Fi Certified a, b, g, n, ac
- Wi-Fi Vantage
- Wi-Fi Multimedia (WMM)
- Passpoint
|
|
Integrated antenna
|
Flexible radio (either 2.4 GHz or 5 GHz)
- 2.4 GHz, gain 2.5 dBi, internal antenna, omnidirectional in azimuth
- 5 GHz, gain 5 dBi, internal directional antenna, elevation plane beam width 90°
Dedicated 5-GHz radio
- 5 GHz, gain 3.5 dBi, internal antenna, omnidirectional in azimuth
Third dedicated radio
- 2.4 GHz and 5 GHz capable
- Hyperlocation antenna array
BLE radio
- 2.4 GHz, gain 2.5 dBi, internal antenna, omnidirectional in azimuth
|
|
Interfaces
|
- 2 Ethernet ports
- 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
- Category 5e cabling
- Higher-quality 10GBASE-T (Category 6/6a) cabling
- 100/1000BASE-T autosensing (RJ-45 AUX port)
- Management console port (RJ-45)
|
|
Indicators
|
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
|
Dimensions (W x L x H)
|
- Access point (without mounting brackets): 8.68 x 9.9 x 2.9 in. (22 x 25 x 7.35 cm)
|
|
Weight
|
- 5.6 lb (2.5 kg)
|
|
Input power requirements
|
- 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE ®)
- 802.3at power injector (AIR-PWRINJ6=)
- 50W power supply (AIR-PWR-50=)
|
|
Power draw
|
- 30W at the Power Source Equipment (PSE) with all features enabled except Multigigabit, AUX Ethernet, and USB support
- 31W at the PSE with full functionality
|
|
Environmental
|
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25°C, 15,000 ft
- Operating temperature: 32° to 104°F (0° to 40°C)
- Operating humidity: 10% to 90% percent (noncondensing)
- Operating altitude test: 40°C, 9843 ft. (noncondensing)
|
|
System memory
|
- 1024 MB DRAM
- 256 MB flash
|
|
Available transmit power settings
|
2.4 GHz
- 23 dBm (200 mW)
- 20 dBm (100 mW)
- 17 dBm (50 mW)
- 14 dBm (25 mW)
- 11 dBm (12.5 mW)
- 8 dBm (6.25 mW)
- 5 dBm (3.13 mW)
- 2 dBm (1.56 mW)
5 GHz
- 23 dBm (200 mW)
- 20 dBm (100 mW)
- 17 dBm (50 mW)
- 14 dBm (25 mW)
- 11 dBm (12.5 mW)
- 8 dBm (6.25 mW)
- 5 dBm (3.13 mW)
- 2 dBm (1.56 mW)
|
|
|
Frequency band and 20-MHz operating channels
|
E (E regulatory domain):
- 2.412 to 2.472 GHz; 13 channels
- 5.180 to 5.320 GHz; 8 channels
- 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
|
|
