C9117AXI-E Specification |
Description | Cisco Catalyst 9117AX Access Point, Internal antenna; Wi-Fi 6; 8x8:8 MIMO, E Domain |
Software | - Cisco Unified Wireless Network Software Release 8.9 or later - Cisco IOS ® XE Software Release 16.11 or later |
Supported wireless LAN controllers | - Cisco Catalyst 9800 Series Wireless Controllers - Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller |
802.11n version 2.0 (and related) capabilities | - 8x8 MIMO with four spatial streams for 5-GHz band - 4x4 MIMO with four spatial streams for 2.4-GHz band - Maximal Ratio Combining (MRC) - 20- and 40-MHz channels - PHY data rates up to 600 Mbps (40 MHz with 5 GHz) - Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) - Cyclic Shift Diversity (CSD) support |
802.11ac | - 8x8 downlink MU-MIMO with eight spatial streams - MRC - 802.11ac beamforming - 20-, 40-, 80, and 160-MHz channels - PHY data rates up to 3.5 Gbps at 5 GHz - Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) - CSD support |
802.11ax | - 8x8 MIMO with eight spatial streams for 5-GHz band - 4x4 MIMO with four spatial streams for 2.4-GHz band - Downlink OFDMA - TWT - MRC - 802.11ax beamforming - 20-, 40-, 80, and 160-MHz channels - PHY data rates up to 5 Gbps at 5 GHz - Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) - CSD support |
Integrated antenna | - 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth - 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
Interfaces | - 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz - Management console port (RJ-45) - USB 2.0 with up to 3.75W (enabled via future software) |
Indicators | - Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) | - Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm) - Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm) |
Weight | - 3.02 lb (1.4 kg) |
Input power requirements | - 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) - Cisco power injector, AIR-PWRINJ6= - 802.3af PoE - Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off. |
Environmental | - Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) - Nonoperating (storage) altitude test: 25°C, 15,000 ft. - Operating temperature: 32° to 122°F (0° to 50°C) - Operating humidity: 10% to 90% (noncondensing) - Operating altitude test: 40°C, 9843 ft. |
System memory | - 2048 MB DRAM - 1024 MB flash |
DFS | - 802.11 dynamic frequency selection (DFS) |
Warranty | Limited lifetime hardware warranty |
Available transmit power settings | 2.4 GHz - 23 dBm (200 mW) - 20 dBm (100 mW) - 17 dBm (50 mW) - 14 dBm (25 mW) - 11 dBm (12.5 mW) - 8 dBm (6.25 mW) - 5 dBm (3.13 mW) - 2 dBm (1.56 mW) - -1 dBm (0.78 mW) - -4 dBm (0.4 mW) - -6 dBm (0.25 mW) 5 GHz - 26 dBm (400 mW) - 23 dBm (200 mW) - 20 dBm (100 mW) - 17 dBm (50 mW) - 14 dBm (25 mW) - 11 dBm (12.5 mW) - 8 dBm (6.25 mW) - 5 dBm (3.13 mW) - 2 dBm (1.56 mW) - -1 dBm (0.78 mW) - -4 dBm (0.4 mW) |
Frequency band and 20-MHz operating channels | E (E regulatory domain): - 2.412 to 2.472 GHz; 13 channels
- 5.180 to 5.320 GHz; 8 channels
- 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz) |
