Category
|
Specifications
|
Radios
|
· 2.4 GHz 802.11b/g/n/ax client access radio
· 5 GHz 802.11a/n/ac/ax client access radio
· 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
· 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
· Concurrent operation of all four radios
· Supported frequency bands (country-specific restrictions apply)
· Supported frequency bands (country-specific restrictions apply):
o 2.412-2.484 GHz
o 5.150-5.250 GHz (UNII-1)
o 5.250-5.350 GHZ (UNII-2)
o 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
o 5.725 -5.825 GHz (UNII-3)
|
Antenna
|
· Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
|
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
|
· DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
· 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
· SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
· Maximal ratio combining (MRC) & beamforming
· 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
· Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
· Packet aggregation
|
Power
|
· Power over Ethernet: 42.5 - 57 V (802.at compliant)
· Alternative: 12 V DC input
· Power consumption: 18W max (802.3at)
· Power over Ethernet injector and DC adapter sold separately
|
Interfaces
|
· 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
· 1x DC power connector (5.5 mm x 2.5 mm, center positive)
|
Mounting
|
· All standard mounting hardware included
· Desktop, ceiling, and wall mount capable
· Ceiling tile rail (9/16, 15/16 or 1 1/2” flush or recessed rails), assorted cable junction boxes
· Bubble level on mounting cradle for accurate horizontal wall mounting
|
Physical Security
|
· Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
· Kensington lock hard point
· Concealed mount plate with anti-tamper cable bay
|
Environment
|
· Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
· Humidity: 5 to 95% non-condensing
|
Physical Dimensions
|
· 12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.426 cm), not including desk mount feet or mount plate
· Weight: 800 g
|
Security
|
· Integrated Layer 7 firewall with mobile device policy management
· Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
· Flexible guest access with device isolation
· VLAN tagging (802.1q) and tunneling with IPsec VPN
· PCI compliance reporting
· WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
· EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
· TKIP and AES encryption
· Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
· Cisco ISE integration for Guest access and BYOD Posturing
|
Quality of Service
|
· Advanced Power Save (U-APSD)
· WMM Access Categories with DSCP and 802.1p support
· Layer 7 application traffic identification and shaping
|
Mobility
|
· PMK, OKC, & 802.11r for fast Layer 2 roaming
· Distributed or centralized layer 3 roaming
|
Analytics
|
· Embedded location analytics reporting and device tracking
· Global L7 traffic analytics reporting per network, per device, & per application
|
LED Indicators
|
· 1 power/booting/firmware upgrade status
|
Regulatory
|
· RoHS
· For additional country-specific regulatory information, please contact Meraki sales
|
Warranty
|
· Lifetime hardware warranty with advanced replacement included
|
Ordering Information
|
· MR46-HW: Meraki MR46 Cloud Managed 802.11ax AP
· MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
· MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
· MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
· Note: Meraki access point license required.
|